|
Layout &
design
our standard bag layout
| H = Height,
W = Width, and G = Gusset
are all dependant to customer preferences requirement &
application. The " x " would be
folded with an enforcement board approximately 350gsm
for enhancing the support of strings on top of the bag.
The " y "
is classified as base of the bag. Together with the "
y ", we put a 400gsm boxboard
for further support. The value of "
y " comes the formula of
0.7*G and it may varies at certain circumstances. The
gluing area is also known is "
z "and it is usually sized at 1(one)
inch. |
So you wish to design your own paper
bag...
Here is the "
ABC" guidance on how we actually produce a
layout for a design. Cheack the below simplified layout. |
a1 + b1 + c1 +
d1 are optional printing areas.
a2 + b2 + c2 + d2 are
recommended printing areas.
a3 + b3 + c3 + d3 are base
and optinal printing areas.
a* and c* are the gusset
b* and d* are the front and back.
e* is the gluing area.
(Nothing can be seen here)
There should be 6mm bleeding
at the area as shown above, (See the
red highlighted area).
| Film
Line Screen |
|
#150 or
#175 for Coted Art Paper & Art Card. |
| |
|
#133 or
#120 for Uncoated Woodfree / Simili. |
| |
|
Bleached
Kraft & Brown Kraft Paper. |
|
|
|
|
|
Best viewed with IE 5.x & Netscape 4.x versions
and above, 1024x768 resolution.
Website created by Tinetek Network Solution Co,.Ltd. |
|